1. Understand the types of insulated cup batteries
The battery with a temperature insulated cup is generally a CR2032 flat silver battery, and some brands also use other types of batteries, but the replacement method is basically the same.
2. Preparation before replacing the battery
(1) Prepare batteries: Purchase batteries of the same model.
(2) Prepare a small screwdriver: The battery holder with a temperature insulated cup is usually fixed with screws and needs to be disassembled with a small screwdriver.
(3) Prepare adhesive: Some brands of insulated cup battery holders will be fixed with glue and need to be dissolved with adhesive.
3. Specific steps for replacing the battery
(1) Use a small screwdriver to remove the screws from the insulation cup battery holder.
(2) Remove the battery holder and dissolve the bottom adhesive with a glue remover
(3) Replace the battery with a new one, pay attention to the direction, and do not install the positive and negative poles upside down.
(4) Use a small screwdriver to fix the battery holder back in place.
4. Меры предосторожности
(1) When replacing the battery, it is important to keep the workbench clean and tidy to prevent dust from entering the battery and affecting its normal use.
(2) Do not use sharp objects to stimulate the battery when replacing it to avoid damaging it.
(3) When replacing the battery, pay attention to the installation position of the positive and negative poles of the battery, and do not install them upside down.
(4) If the battery holder is fixed with glue when replacing the battery, it is necessary to use a glue remover to dissolve the glue, and be careful not to overturn the thermos cup.
Replacing the battery with a temperature insulated cup may be tedious, but as long as it is done correctly, it can be easily completed without affecting the effectiveness of the insulated cup. To maintain the insulation effect of the thermos cup, it is recommended to conduct a water temperature test after replacing the battery to confirm whether the temperature is stable.
